Product Benefits

The Align Pilates Half Cadillac Wall Unit with Wall Bracket bolts the Half Cadillac frame onto a solid wall and runs as a standalone apparatus. No reformer sits under it and none is used. You get push through bar, roll down bar, arm and leg spring and standing spring work from a frame 189cm off the floor that projects 56cm into the room. The usual route to this repertoire is a reformer with a tower, which commits a reformer station and a lot of floor. This one spends wall instead. Buyers often call it a Pilates tower.

2. Solid walls only. It cannot be used on stud walls. This is the most common reason a buyer ends up unable to install. Brick, block, concrete or solid masonry is required. A stud partition with plasterboard over it will not carry the frame or the spring loads pulled through it. There is no workaround. Check the wall before you order, not after the pallet arrives.

3. Wall fixings and bolts are not supplied. The right anchor depends on what your wall is made of. Align-Pilates recommends professional installation and does not provide it, so budget for an installer to specify the fixings.

• Half Cadillac repertoire off a wall, with no reformer underneath it and no floor given up

• Three things decide whether you can install this. Check them before you order

• 1. It bolts to a wall, not to a reformer. Both bracket arms fix to the wall, nothing fixes to the floor, and the bracket will not fit a reformer.

• Best for, and not ideal for

Ideal For

Studios with a spare solid wall that want spring work without losing a reformer

Rooms where floor area is the constraint and wall area is not

Physio and rehab rooms adding spring work beside existing kit

Home studios in masonry buildings with no room for a Cadillac footprint

Not ideal for

Rooms where the only free wall is stud and plasterboard

Rented space where drilling structural walls is not permitted

Buyers who want the flat Cadillac bed, which needs a reformer carriage

Anyone needing to move or store the apparatus between sessions

Why we carry this one

Most studios reach a point where they want Half Cadillac repertoire and cannot make the floor maths work. A Full Cadillac wants a permanent bay. A reformer mounted Half Cadillac ties up a machine that was earning its keep as a reformer. This unit answers both by using vertical space that was doing nothing.

The upper frame is the one used across the Half Cadillac line: full stainless steel, an aluminium push through bar with rapid adjust height changers, a maple roll down bar, a quick release safety strap and eight springs in two lengths. This is the newer bracket generation, reworked so the whole load path goes into the wall. If your wall is not solid, the answer is a different product, not a heavier bolt.

Wall mounted against reformer mounted

The same Half Cadillac frame does both jobs. What changes is what it hangs off. On this bracket it stands alone, uses no floor beyond its 56cm projection and stays put. What you give up is the flat bed, because Cadillac style supine work comes from a reformer carriage with a mattress converter and platform extender. This is a standing and spring station, not a table.

Mounted on a reformer, the frame turns a machine you own into a two in one. That needs a model specific reformer bracket set, sold separately, and fits A, M and C Series reformers except the C1. For that route already matched and boxed, see the C8-Pro reformer with Half Cadillac or the M8-Pro with Half Cadillac.

Decision point

Wall mounted, this listing

Reformer mounted

Reformer needed

No, standalone

Yes, A, M or C Series, not the C1

Extra parts

Wall fixings and bolts, sourced locally

Model specific reformer bracket set

Floor used

56cm of projection

Full reformer length plus walk around space

Flat Cadillac bed

No

Yes, with converter and extender

What the specs mean for you

Specification

What it means in practice

202.5cm H x 80.5cm W x 56cm D

Two metres of wall height, 80cm wide, intruding 56cm. A 2 metre working strip in front is comfortable

189cm frame height

Sits below a standard ceiling, but allow headroom for the roll down bar arc and a standing client

Solid walls only

Brick, block, concrete or masonry. Confirm the substrate before ordering

37.5kg assembled

The wall carries 30kg of frame and 15.7kg of bracket, plus whatever a client pulls through the springs

Stainless steel upper frame

Corrosion resistant and easy to wipe down in a humid room

8 springs, two lengths

Standard 47cm and long 64cm, so short and long spring work needs no extra hardware

Ten minute frame assembly

Bolting the frame is quick. The skill and time go into fixing the bracket to the wall

What ships with it

Supplied as a set, code PAPHALFCADA2WALLSET, so frame PAP-HALFCADA2 and bracket PAP-HALFADAPTA2 arrive together.

Half Cadillac frame, stainless steel upper frame

Wall unit adapter bracket, top and bottom arms

1 aluminium push through bar with rapid adjust height changers

1 maple pull down bar, 1 quick release safety strap

1 pair of foot straps, 1 pair of hand handles

2 pairs of rapid adjust double eyelet spring holders, 8 aluminium carabiners, 8 double ended dog clips

8 nickel plated music wire springs: 2 standard 47cm very light yellow, 2 standard 47cm medium red, 2 long 64cm light purple, 2 long 64cm strong red

Also required, sold separately

Not usable straight out of the crate. Two things come from elsewhere.

Wall fixings and bolts. Not supplied. The correct anchor depends on the wall material, so your installer specifies them.

A solid wall and a qualified installer. Align-Pilates recommends professional installation and does not provide it. Stud walls are excluded outright.

Optional: additional or replacement springs, and a reformer bracket set if you later move the frame onto a machine.

contact us at support@goofitness.com, 9am to 6pm EST Monday to Friday, and we will run a wall and compatibility check before you order. Tell us what the wall is built from and what the room measures. If it is wrong for your space, we will say so.

Full specifications

Specification

Detail

Product codes

PAP-HALFCADA2 frame with PAP-HALFADAPTA2 wall bracket, supplied together as PAPHALFCADA2WALLSET

Assembled dimensions

202.5cm H x 80.5cm W x 56cm D

Assembled weight

37.5 kg

Frame height

189cm from floor

Frame weight

30 kg

Wall bracket weight

15.7 kg

Wall bracket depth

56 cm

Frequently Asked Questions

What kind of wall does this need? Solid walls only — brick, block, concrete, or solid masonry. It cannot be used on stud walls, since plasterboard over a stud partition won't carry the frame or spring loads.

Does it require a reformer to work? No, it bolts directly to the wall and runs as a standalone apparatus — no reformer sits under it and none is used.

How far off the floor and into the room does it sit? The frame sits 189cm off the floor and projects 56cm into the room.

Are wall fixings included? No, wall fixings and bolts are not supplied — the right anchor depends on your wall material, and Align-Pilates recommends professional installation to specify them.

What exercises does it support? Push-through bar, roll-down bar, arm and leg spring work, and standing spring work.

Questions? Contact us at support@goofitness.com or visit goofitness.com.