top of page

Product Benefits

The OxyRevo Space60 is a stainless steel hard sitting hyperbaric chamber for home and clinic use. You sit upright or recline in a chair and run a 90 to 97 percent oxygen session on your own. It comes in two pressure builds, 1.5 ATA and 2.0 ATA, and two cabin widths, a 34 inch Standard and a 29.5 inch Mini.

The two widths are the same chamber. Same 79 inch length, same 60 inch height, same pressure builds, same chair. Width is the only thing that changes, and it is what decides whether the chamber fits through your door.

Measure your narrowest doorway and hallway before you order, and choose the width from the options at the top of this page. Not sure which fits? contact us at support@goofitness.com.

We work with multiple financing partners for both personal and business buyers, so you can compare options and spread the cost into monthly payments. Your rate and monthly figure depend on your credit and the partner you choose. contact us at support@goofitness.com and we will walk through the options that fit you, in the US and Canada.

Before you order. Measure the full route into the room, including hallways, corners and any elevator, and confirm your 110V or 220V outlet. Leave clear space around the unit so it can shed heat, and keep it out of bathrooms and damp rooms. OxyRevo asks that you run the empty chamber once before anyone gets in. Pi

  • OxyRevo Space60 Hard Sitting Hyperbaric Chamber

  • Recharge. Recover. Rebuild.

  • Why buyers choose the Space60

  • Stainless steel and Bayer polycarbonate body with welded seams

  • Oil-free compressor under 50 dB with dual air filters

  • 10 L oxygen concentrator delivering 90 to 97 percent purity

  • 30 second emergency pressure release, door sensor, and power-failure auto depressurize

  • 0 to 120 minute timer, LED reading light, and four lockable wheels

  • See the price and monthly financing at the top of this page.

  • OxyRevo Space60 overview. Watch on YouTube

  • Swipe to see the full table →

  • OxyRevo Space60 Standard vs Mini width

  • Specification

  • Standard

  • Mini

  • Width

  • 34 in (86 cm)

  • 29.5 in (75 cm)

  • Doorway fit

  • Passes a 34 in doorway with the outside panels removed

  • Clears a standard 30 in residential doorway as built

  • Shoulder room

  • The most room inside

  • Narrower, for tighter spaces

  • Length

  • 79 in (200 cm)

  • 79 in (200 cm)

  • Height

  • 60 in (153 cm)

  • 60 in (153 cm)

  • Designed to solve common chamber problems

  • Claustrophobic chambers? A wide door and dual polycarbonate windows bring in light and make the cabin feel open. You sit upright rather than lying in a tube.

  • Toxic glues or odors? The stainless steel and polycarbonate build with welded seals keeps the air clean and odor-free.

  • Loud compressors? The oil-free air system runs under 50 dB, with dual filters for clean airflow.

  • Limited air purification? A built-in anion system removes dust and helps reduce bacteria.

  • Sitting mode or recline mode

  • Sitting mode

  • Recline mode

  • Why buy the Space60 from GooFitness

  • 120% price match. Find the same Space60 configuration advertised for less and we beat the difference by 20 percent.

  • Video installation support. A guided video walkthrough for your setup, plus three more video support sessions if you need them.

  • Recovery specialists on the phone. We match the build, width and chair to your room and doorway before you order.

  • Financing

  • How to use the Space60

  • Step 1. Choose a well-ventilated area. Place the chamber on a level surface, connect the tubes, and check the airflow.

  • Step 2. Enter through the transparent door, then adjust the chair for sitting or full recline.

  • Step 3. Close the door. Set the pressure within your build's range using the control panel, and watch the digital displays.

  • Step 4. Breathe calmly in the 90 to 97 percent oxygen environment. The manufacturer states a session length of 60 to 120 minutes.

  • Step 5. Depressurize before opening the door to end the session.

Specifications

  • Standard or Mini: which width fits your room

Ideal For

Home wellness setups and recovery-focused users.

Shipping & Delivery

One honest limitation. At 1,323 lbs this is a permanent installation, not something you move room to room. Plan placement and confirm the route in before delivery.

Warranty

✓ GooFitness is an authorized OxyRevo dealer. Every order includes the factory warranty and direct manufacturer support.

Authorized OxyRevo dealer. Full factory warranty and direct manufacturer support. Warranty terms are on the FAQ tab.

Frequently Asked Questions

What pressure levels does the Space60 offer? Two builds, 1.5 ATA and 2.0 ATA.

What widths are available? A 34-inch Standard cabin and a 29.5-inch Mini cabin; both share the same 79-inch length and 60-inch height.

What oxygen concentration does it run? A 90 to 97 percent oxygen session, run on your own while seated upright or reclined.

What power does it need? A 110V or 220V outlet.

Is financing available? Yes, GooFitness works with multiple financing partners for personal and business buyers.

Questions? Contact us at support@goofitness.com or visit goofitness.com.

OxyRevo Space60 1.5 to 2.0 ATA Hard Sitting Hyperbaric Chamber

$49,800.00 Regular Price
$22,410.00Sale Price
Quantity
    bottom of page